The VT Sheet Pile Clamp is placed on sheet pile profiles or trench sheets from 5-15 mm and fastened. It is easy to install thanks to the integrated DW15 nut and the locking thread.

• 1100002
• 1.4 kg
• EN 13374, class A
• electrogalvanised
• 175 x 112 mm

Clamping widths of 50-600 mm and easy to adjust by hand and with a hammer. The clamp has three options for holding posts.

• 5040021
• 5.8 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 730 x 240 mm

Depending on the type of barrier, between 45 and 60 barriers can be transported.

• 2010007
• 89 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 1335 x 1200 x 1200 mm

The Euro Box is a standardized means of transportation for the safe transport of goods.

• 6010003
• 70 kg
• EN 13626
• painted
• 1240 x 840 x 970 mm

This clamp is used to attach standard edge protection to sheet pile profiles, trench shoring panels and HEB beams. Clamping width up to 150 mm and easy to mount. Tightening using a hammer.

• 5040034
• 4.8 kg
• EN 13374, class A
• galvanized
• 330 x 249 x 180 mm

The VT Hinge connects two steel barriers together. Thanks to the hinge, it can be done without one of two posts and one of two post holders for a corner cladded with edge protection.

• 1100023
• 0.6 kg
• electrogalvanised
• 316 mm

The VT Clamp Hook for Staircase enables safe attachment of the VT Clamp XL 60 to the stair stringer. The lower part of the base body of the clamp is inserted into the clamp holder.

• 5041510
• 1.4 kg
• hot-dip galvanised (HDG)
• 200 x 300 cm

The Weld-on Attachment is welded directly onto the steel beam or steel structure and is used to hold an edge protection post.

• 5100021
• 0.3 kg
• EN 13374, class A
• blank
• 120 mm

The VT Steelflange is used to hold an edge protection post on steel beams without having to drill for it. This clamp allows clamping widths of 80-460 mm.

• 5040007
• 3.8 kg
• EN 13374, class A
• hot-dip galvanised (HDG)
• 730 x 240 cm

The VT Steelweb 425 is designed to connect through a steel beam or onto a vertical surface. The post is adjustable in off set up to 400 mm.

• 5040041
• 3.9 kg
• EN 13374 – ABC
• hot-dip galvanised (HDG)
• 418 x 425 x 155 mm